262
19. The following equipment is mandatory, please refer to the relevant user
manuals for instructions in usage; blood oxygen monitor, CO
2
alarm,
blood pressure alarm, ECG alarm, anesthesia agent concentration.
20. The machine is to be equipped with an anesthetic gas scavenging
transfer and receiving system, complying with ISO 8835-3 or
applicable local standard before being put into service.
9.9.2 Electrostatic Sensitive Devices (ESD) Warnings and
Cautions
Notices and Important Information
• All ESD must be stored in approved conductive packaging, tubes,
shipping bags, foam or tote bins.
• All persons handling ESD must be properly grounded via a 1MΩ
resistive grounded wrist strap.
• Cover all ESD bench tops with grounded conductive mats and
connect all work surfaces and equipment to earth ground.
• Transport all assemblies containing ESD in a conductive bag or
container.
• DO NOT use cellophane adhesive tape to wrap DIP (dual inline
package) tubes together.
• DO NOT handle ESD by their pins or mix them with other routine
electronic parts.
• Never place ESD on ungrounded surfaces or leave them unattended
in an open area.
• Avoid cellophane wrappers, synthetic (non conductive) carpeting,
warm or cool air blasts, Styrofoam coffee cups, etc. when working
with ESD.
• Use only properly designed heat lamps, heat chambers and/or
‘antistatic’ quickchill sprays during troubleshooting or stress testing
procedures.
NOTE: In particular electronic assemblies in the BleaseSirius®
range of machines are easily damaged by ESD and require
special handling.
To Next Page
Loading...