239
7.1 Error Codes
7.1.1 Error codes on the Blease700/900 series Ventilators
This list includes error codes which were assigned to the 64180 controller
board, but which are not applicable to the MPC68302 controller board. These
are described as N/A. It also includes codes which only apply to 6x00 serial
vents with control potentiometers - these are indicated 6x00 only.
The following table includes only the error codes that the Blease700/900 series
of ventilators will generate, with their common cause and corrective action.
Error Codes
To Next Page
Loading...