221
Note: The EFM Board only functions with EFM Software Versions that are
compatible with the EFM Board Version. The Service Application will dis-
play an error message if the EFM software update is not compatible with
the EFM Board Version. You cannot install incompatible software.
4. Select Software Update to install the user software on the EFM Flash
drive. This installation takes less than 1 minute.
Note: If the touch screen does not function, reboot the system.
5. After the software is installed, you must confi gure the Flow Tubes
as described in the next section. Do not exit this application before
confi guring the fl ow tubes!
Note: The Software Update preserves the Touch-Screen calibrations, so
you do not need to reconfi gure the Touch-Screen after a software instal-
lation.
EFM Option
To Next Page
Loading...