1B-5 Emission Control Devices:
Specifications
Service Data
B944H11207001
FI Sensors
Tightening Torque Specifications
B944H11207002
Reference:
For the tightening torque of fastener not specified in this section, refer to “Tightening Torque List in Section 0C
(Page 0C-7)”.
Item Specification Note
HO2 sensor heater resistance Approx. 8 Ω at 23 °C (73 F°)
HO2 sensor output voltage
Approx. 0.45 V and less at idle speed
0.6 V and more at 6 000 r/min
Fastening part
Tightening torque
Note
N⋅mkgf-mlbf-ft
HO2 sensor 25 2.5 18.0 )(Page 1B-4)
To Next Page
Loading...
