Suzuki SFV650 - Throttle Body Components

1D-7 Engine Mechanical:
5) Disconnect the crankcase breather hose (5).
6) Remove the air cleaner box.
Installation
Install the air cleaner box in the reverse order of
removal. Pay attention to the following points:
• Fit the air cleaner outlet tube clamps properly. Refer to
“Throttle Body Construction (Page 1D-8)”.
• Route the hoses properly. Refer to “Throttle Body
Construction (Page 1D-8)”.
• Tighten the air cleaner outlet tube clamp screws (1).
Throttle Body Components
B944H11406040
5
I944H1140259-01
1
1
I944H1140260-01
FWD
FWD
1
(a)
3
(a)
3
4
4
4
4
4
6
6
2
5
5
7
8
11
(b)
9
(b)
10
I944H1140341-04
1. Fuel delivery pipe #1 5. Fuel injector 9. STP sensor mounting screw : 3.5 N⋅m (0.35 kgf-m, 2.5 lbf-ft)
2. Fuel delivery pipe #2 6. Cushion seal 10. TP sensor mounting screw : Apply engine oil.
3. Fuel delivery pipe mounting screw 7. STP sensor 11. Air screw : Do not reuse.
4. O-ring 8. TP sensor : 5 N⋅m (0.5 kgf-m, 3.5 lbf-ft)