1D-87 Engine Mechanical:
NOTE
The specified tightening torque is described in the following.
“Throttle Body Components (Page 1D-7)”
“Throttle Body Construction (Page 1D-8)”
“Engine Assembly Installation (Page 1D-22)”
Reference:
For the tightening torque of fastener not specified in this section, refer to “Tightening Torque List in Section 0C
(Page 0C-7)”.
Special Tools and Equipment
Recommended Service Material
B944H11408001
NOTE
Required service material is also described in the following.
“Throttle Body Components (Page 1D-7)”
“Engine Assembly Installation (Page 1D-22)”
Material SUZUKI recommended product or Specification Note
Grease SUZUKI SUPER GREASE A or
equivalent
P/No.: 99000–25010 )(Page 1D-13) /
)(Page 1D-43) /
)(Page 1D-68) /
)(Page 1D-69) /
)(Page 1D-69) /
)(Page 1D-69) /
)(Page 1D-71) /
)(Page 1D-72) /
)(Page 1D-72) /
)(Page 1D-74) /
)(Page 1D-78) /
)(Page 1D-78)
Molybdenum oil MOLYBDENUM OIL SOLUTION — )(Page 1D-31) /
)(Page 1D-31) /
)(Page 1D-32) /
)(Page 1D-34) /
)(Page 1D-35) /
)(Page 1D-38) /
)(Page 1D-39) /
)(Page 1D-48) /
)(Page 1D-48) /
)(Page 1D-49) /
)(Page 1D-66) /
)(Page 1D-67) /
)(Page 1D-67) /
)(Page 1D-69) /
)(Page 1D-79) /
)(Page 1D-80)
Sealant SUZUKI BOND No.1215 or
equivalent
P/No.: 99000–31110 )(Page 1D-31) /
)(Page 1D-71)
SUZUKI BOND No.1207B or
equivalent
P/No.: 99000–31140 )(Page 1D-41) /
)(Page 1D-74)
Thread lock cement THREAD LOCK CEMENT SUPER
1303 or equivalent
P/No.: 99000–32030 )(Page 1D-24) /
)(Page 1D-76)
THREAD LOCK CEMENT SUPER
1322 or equivalent
P/No.: 99000–32110 )(Page 1D-23) /
)(Page 1D-69) /
)(Page 1D-76)