4A-2 Brake Control System and Diagnosis:
Rear Brake Hose Routing Diagram
B944H14102003
“a”
(a)
2
1
3
5
4
5
“C”
“A”
1
(a)
(b)
(a)
(c)
“c”
“b”
“C”
“B”
I944H1410042-01
1. Stopper
: After the brake hose union has contacted the stopper, tighten the union bolt.
“C”: Insert the reservoir hose firmly.
2. Brake hose clamp
: Brake hose clamp ends should face backward.
“a”: 84°
3. Brake hose clamp
: Brake hose clamp ends should face downward.
“b”: 14°
4. Frame “c”: 35°
5. Reservoir hose clamp : 23 N⋅m (2.3 kgf-m, 16.5 lbf-ft)
“A”: White paint :6 N⋅m (0.6 kgf-m, 4.5 lbf-ft)
“B”: Yellow paint : 27 N⋅m (2.7 kgf-m, 19.5 lbf-ft)