Front Brakes: 4B-6
Front Brake Caliper Parts Inspection
B944H14206006
Refer to “Front Brake Caliper Disassembly and
Assembly (Page 4B-4)”.
Brake Caliper Cylinder
Inspect the brake caliper cylinder wall for nicks,
scratches or other damage. If any damage is found,
replace the caliper with a new one.
Brake Caliper Piston
Inspect the brake caliper piston surface for any
scratches or other damage. If any damage is found,
replace the piston with a new one.
Brake Caliper Holder Sliding Pin
Inspect the brake caliper holder sliding pins for wear and
other damage. If any damage is found, replace the brake
caliper holder with a new one.
Brake Pad Spring and Pad Guide
Inspect the brake pad spring and pad guide for damage
and excessive bend. If any defects are found, replace
them with new ones.
Rubber Boot
Inspect the rubber boots for damage. If any damages
are found, replace them with the new ones.
Front Brake Disc Removal and Installation
B944H14206007
Removal
1) Remove the front wheel assembly. Refer to “Front
Wheel Assembly Removal and Installation in Section
2D (Page 2D-4)”.
2) Remove the front brake disc (1) by removing its bolts
(2).
I944H1420019-01
I944H1420020-01
I944H1420021-01
I944H1420022-01
I944H1420023-01
2
2
1
I944H1420024-03
To Next Page
Loading...
