Suzuki SFV650 - Specifications; Tightening Torque Specifications; Special Tools and Equipment; Recommended Service Material

Steering / Handlebar: 6B-10
Specifications
Tightening Torque Specifications
B944H16207001
NOTE
The specified tightening torque is described in the following.
“Handlebars Components (Page 6B-1)”
“Handlebar Construction (Page 6B-2)”
“Steering Components (Page 6B-5)”
Reference:
For the tightening torque of fastener not specified in this section, refer to “Tightening Torque Specifications in Section
0B (Page 0B-21)”.
Special Tools and Equipment
Recommended Service Material
B944H16208001
NOTE
Required service material is also described in the following.
“Steering Components (Page 6B-5)”
Fastening part
Tightening torque
Note
N⋅m kgf-m lbf-ft
Handlebar holder bolt 23 2.3 16.5 )(Page 6B-4)
Steering stem nut 45 N⋅m (4.5 kgf-m, 32.5 lbf-ft) then turn
back 1/2 – 1/4
)(Page 6B-7)
Steering stem head nut 90 9.0 65.0 )(Page 6B-7)
Material SUZUKI recommended product or Specification Note
Grease SUZUKI SUPER GREASE A or
equivalent
P/No.: 99000–25010 )(Page 6B-4) / )(Page 6B-
7)
Handle grip bond Handle Grip Bond (commercially
available)
— )(Page 6B-4)