Lighting Systems: 9B-11
Turn Signal Light Components
B944H19206032
Front Turn Signal Light Removal and
Installation
B944H19206014
Removal
1) Remove the headlight assembly. Refer to “Headlight
Removal and Installation (Page 9B-4)”.
2) Disconnect the front turn signal light coupler (1).
3) Remove the front turn signal light (2) by removing
the nut (3).
Installation
Install the front turn signal light in the reverse order of
removal. Pay attention to the following point:
• Tighten the front turn signal light mounting nut (1) to
the specified torque.
Tightening torque
Front turn signal light mounting nut (a): 1.3 N·m (
0.13 kgf-m, 1.0 lbf-ft)
2
(a)
3
1
I944H1920047-05
1. Turn signal light bulb (12 V 10 W x 4) 3. Turn signal light mounting nut
2. Lens : 1.3 N⋅m (0.13 kgf-m, 1.0 lbf-ft)
1
2
3
I944H1920026-01
(a)
1
I944H1920027-01
To Next Page
Loading...
