Wheels and Tires: 2D-1
Suspension
Wheels and Tires
Precautions
Precautions for Wheel and Tire
B944H12400001
WARNING
!
• Proper tire pressure and proper tire loading are important factors. Over loading tire can lead to tire
failure and loss of motorcycle control.
• Under-inflated tires make smooth cornering difficult, and can result in rapid tire wear.
• Over-inflated tires have a smaller amount of tire in contact with the load, which can contribute to
skidding and loss of control.
• Do not interchange tires between wheels on the same vehicle.
Do not use tires of sizes and types different from the originally installed tires.
Rotation of tires or use of such different tires may adversely affect handling of the vehicle and can
result in loss of control.
• Replace the wheel when wheel runout exceed the service limit or if find damage such as distortion,
crack, nick or scratch.
• When tire replacement is necessary, the original equipment type tire should be used.
• Do not mix different types of tires on the same vehicle such as radial and bias-belted tires except in
emergencies, because handling may be seriously affected and may result in loss of control.
• Replacement wheel must be equivalent to the original equivalent wheel.
To Next Page
Loading...
