Suzuki SFV650 - Front Fork Inspection; Front Fork Adjustment

2B-3 Front Suspension:
5) Tighten the front fork lower clamp bolts (1).
Tightening torque
Front fork lower clamp bolt (b): 23 N·m (2.3 kgf-
m, 16.5 lbf-ft)
6) Tighten the front fork upper clamp bolt (3).
Tightening torque
Front fork upper clamp bolt (c): 23 N·m (2.3 kgf-
m, 16.5 lbf-ft)
7) Install the front wheel assembly. Refer to “Front
Wheel Assembly Removal and Installation in Section
2D (Page 2D-4)”.
WARNING
!
After remounting the brake caliper, pump the
brake lever until the pistons push the pads
correctly.
NOTE
Before tightening the front axle and front axle
pinch bolt, move the front fork up and down
four or five times.
Front Fork Inspection
B944H12206006
Refer to “Front Fork Inspection (Page 2B-3)”.
Front Fork Adjustment
B944H12206007
Turn the adjustment (1) to the desired position.
CAUTION
!
Adjust the left and right front forks to the
same setting.
STD position
3rd groove from top
(b)
1
I944H1220005-01
(c)
3
I944H1220006-02
I944H1220029-01
[A]: Position 0 (maximum) [C]: Position 5 (minimum)
[B]: Position 3 (STD)
1
I944H1220030-01
1
0
2
3
4
5
1
0
2
3
0
[A] [B] [C]
I718H1220015-01