Suzuki SFV650 - Tightening Torque Specifications; Special Tools and Equipment; Recommended Service Material; Special Tool

Front Suspension: 2B-10
Tightening Torque Specifications
B944H12207002
NOTE
The specified tightening torque is described in the following.
“Front Fork Components (Page 2B-1)”
Reference:
For the tightening torque of fastener not specified in this section, refer to “Tightening Torque List in Section 0C
(Page 0C-7)”.
Special Tools and Equipment
Recommended Service Material
B944H12208001
NOTE
Required service material is also described in the following.
“Front Fork Components (Page 2B-1)”
Special Tool
B944H12208002
Fastening part
Tightening torque
Note
N⋅m kgf-m lbf-ft
Front fork cap bolt 23 2.3 16.5 )(Page 2B-2)
Front fork lower clamp bolt 23 2.3 16.5 )(Page 2B-3)
Front fork upper clamp bolt 23 2.3 16.5 )(Page 2B-3)
Front fork cylinder bolt 20 2.0 14.5 )(Page 2B-7)
Material SUZUKI recommended product or Specification Note
Fork Oil SUZUKI FORK OIL SS-08 or
equivalent
P/No.: 99000–99001–
SS8
)(Page 2B-5) / )(Page 2B-
6) / )(Page 2B-6) /
)(Page 2B-7)
SUZUKI FORK OIL G-10 or
equivalent
P/No.: 99000–99044–
10G
)(Page 2B-8)
Thread lock cement THREAD LOCK CEMENT SUPER
1322 or equivalent
P/No.: 99000–32110 )(Page 2B-7)
09940–34520 09940–34531
T type handle Front fork assembling
attachment (A)
)(Page 2B-4) / )(Page 2B-
7)
)(Page 2B-4) / )(Page 2B-
7)
09940–52861 09943–74111
Front fork oil seal installer
set
Front fork oil level gauge
)(Page 2B-6) )(Page 2B-8)