Suzuki SFV650 - Front Wheel Dust Seal; Bearing Removal and Installation

Wheels and Tires: 2D-7
Front Wheel Dust Seal / Bearing Removal and
Installation
B944H12406005
Removal
1) Remove the front wheel assembly. Refer to “Front
Wheel Assembly Removal and Installation
(Page 2D-4)”.
2) Remove the dust seals (1) on both sides using the
special tool.
Special tool
(A): 09913–50121 (Oil seal remover)
3) Remove the bearings (2) on both sides using the
special tool.
Special tool
(B): 09921–20240 (Bearing remover set)
4) Remove the spacer (3).
Installation
CAUTION
!
The removed dust seals and bearings must
be replaced with new ones.
1) Apply grease to the wheel bearings.
: Grease 99000–25010 (SUZUKI SUPER
GREASE A or equivalent)
1
(A)
I944H1240017-01
(B)
2
I944H1240018-01
3
I944H1240019-01
I649G1240019-02