Suzuki SFV650 - Tightening Torque Specifications; Special Tools and Equipment; Recommended Service Material; Special Tool

Brake Control System and Diagnosis: 4A-17
Tightening Torque Specifications
B944H14107002
NOTE
The specified tightening torque is described in the following.
“Front Brake Hose Routing Diagram (Page 4A-1)”
“Rear Brake Hose Routing Diagram (Page 4A-2)”
“Front Brake Master Cylinder Components (Page 4A-9)”
“Rear Brake Master Cylinder Components (Page 4A-13)”
Reference:
For the tightening torque of fastener not specified in this section, refer to “Tightening Torque List in Section 0C
(Page 0C-7)”.
Special Tools and Equipment
Recommended Service Material
B944H14108001
NOTE
Required service material is also described in the following.
“Front Brake Master Cylinder Components (Page 4A-9)”
“Rear Brake Master Cylinder Components (Page 4A-13)”
Special Tool
B944H14108002
Fastening part
Tightening torque
Note
N⋅m kgf-m lbf-ft
Air bleeder valve (Front brake)
7.5 0.75 5.5
)(Page 4A-5) /
)(Page 4A-7)
Air bleeder valve (Rear brake)
6 0.6 4.5
)(Page 4A-6) /
)(Page 4A-8)
Master cylinder holder bolt (Upper and Lower) 10 1.0 7.0 )(Page 4A-10)
Brake hose union bolt
23 2.3 16.5
)(Page 4A-10) /
)(Page 4A-14)
Brake lever pivot bolt 6 0.6 4.5 )(Page 4A-12)
Brake lever pivot bolt lock-nut 6 0.6 4.5 )(Page 4A-12)
Rear brake master cylinder mounting bolt 10 1.0 7.0 )(Page 4A-14)
Rear brake master cylinder rod lock-nut 18 1.8 13.0 )(Page 4A-14)
Material SUZUKI recommended product or Specification Note
Brake fluid DOT 4 — )(Page 4A-6) / )(Page 4A-
7) / )(Page 4A-11) /
)(Page 4A-15)
Grease SUZUKI Silicone Grease or
equivalent
P/No.: 99000–25100 )(Page 4A-12) /
)(Page 4A-16)
09900–06108 09900–25008
Snap ring remover (Close
type)
Multi circuit tester set
)(Page 4A-11) /
)(Page 4A-15)
)(Page 4A-4) / )(Page 4A-
4)