Rear Suspension: 2C-12
Specifications
Service Data
B944H12307001
Suspension
Unit: mm (in)
Tightening Torque Specifications
B944H12307002
NOTE
The specified tightening torque is described in the following.
“Rear Suspension Components (Page 2C-1)”
“Rear Suspension Assembly Construction (Page 2C-2)”
Reference:
For the tightening torque of fastener not specified in this section, refer to “Tightening Torque List in Section 0C
(Page 0C-7)”.
Item Standard Limit
Rear shock absorber spring
adjuster
3rd position —
Rear wheel travel 130 (5.1) —
Swingarm pivot shaft runout — 0.3 (0.01)
Fastening part
Tightening torque
Note
N⋅m kgf-m lbf-ft
Rear shock absorber upper mounting nut
50 5.0 36.0
)(Page 2C-3) /
)(Page 2C-9)
Rear shock absorber lower mounting bolt
50 5.0 36.0
)(Page 2C-3) /
)(Page 2C-6) /
)(Page 2C-9)
Cushion rod upper mounting bolt 78 7.8 56.5 )(Page 2C-3)
Cushion lever mounting nut 78 7.8 56.5 )(Page 2C-6)
Cushion rod mounting bolt 78 7.8 56.5 )(Page 2C-6)
Front footrest bracket mounting bolts 23 2.3 16.5 )(Page 2C-6)
Swingarm pivot nut 100 10.0 72.5 )(Page 2C-9)
Cushion rod upper mounting nut 78 7.8 56.5 )(Page 2C-9)
To Next Page
Loading...
