Suzuki SFV650 - Specifications

1K-8 Exhaust System:
Specifications
Tightening Torque Specifications
B944H11B07001
NOTE
The specified tightening torque is described in the following.
“Exhaust System Construction (Page 1K-2)”
Reference:
For the tightening torque of fastener not specified in this section, refer to “Tightening Torque List in Section 0C
(Page 0C-7)”.
Special Tools and Equipment
Recommended Service Material
B944H11B08001
NOTE
Required service material is also described in the following.
“Exhaust System Construction (Page 1K-2)”
Fastening part
Tightening torque
Note
N⋅mkgf-mlbf-ft
Muffler cover bolt 5.5 0.55 4.0 )(Page 1K-5)
HO2 sensor 25 2.5 18.0 )(Page 1K-5)
Exhaust pipe bolt
23 2.3 16.5
)(Page 1K-6) /
)(Page 1K-6) /
)(Page 1K-7)
Exhaust mounting bolt 23 2.3 16.5 )(Page 1K-6)
Exhaust cover bolt 5.5 0.55 4.0 )(Page 1K-6)
Exhaust pipe connecting bolt
23 2.3 16.5
)(Page 1K-6) /
)(Page 1K-7)
Muffler mounting nut
25 2.5 18.0
)(Page 1K-7) /
)(Page 1K-7)
Muffler connecting bolt
23 2.3 16.5
)(Page 1K-7) /
)(Page 1K-7)
Material SUZUKI recommended product or Specification Note
Muffler seal MUFFLER SEAL LOCTITE 5920
(commercially available) or
equivalent
— )(Page 1K-6) / )(Page 1K-
7)