Suzuki SFV650 - Swingarm Removal and Installation

Rear Suspension: 2C-8
2) Apply grease to the bearings.
: Grease 99000–25010 (SUZUKI SUPER
GREASE A or equivalent)
3) Install the cushion lever. Refer to “Rear Shock
Absorber Removal and Installation (Page 2C-3)”.
Swingarm Removal and Installation
B944H12306011
Removal
1) Remove the muffler and exhaust assembly.
Refer to “Exhaust Pipe / Muffler Removal and
Installation in Section 1K (Page 1K-3)”.
2) Remove the rear wheel assembly. Refer to “Rear
Wheel Assembly Removal and Installation in Section
2D (Page 2D-11)”.
3) Remove the drive chain cover mounting screws (1)
and bolts (2).
4) Remove the brake hose clamp screw (3).
5) Remove the rear shock absorber (4). Refer to “Rear
Shock Absorber Removal and Installation (Page 2C-
3)”.
6) Remove the swingarm by removing the swingarm
pivot nut (5), washer (6) and swingarm pivot shaft
(7).
7) Remove the chain adjusters (8).
8) Remove the chain buffer (9).
I944H1230025-01
1
2
I944H1230026-01
3
I944H1230027-01
4
I944H1230028-01
5
6
7
I944H1230029-01
8
I944H1230030-02
9
I944H1230031-02