Suzuki SFV650 - Specifications; Service Data; Tightening Torque Specifications

4C-8 Rear Brakes:
Specifications
Service Data
B944H14307001
Brake
Unit: mm (in)
Oil
Tightening Torque Specifications
B944H14307002
NOTE
The specified tightening torque is described in the following.
“Rear Brake Components (Page 4C-1)”
Reference:
For the tightening torque of fastener not specified in this section, refer to “Tightening Torque List in Section 0C
(Page 0C-7)”.
Item Standard Limit
Brake disc thickness Rear 4.8 – 5.2 (0.19 – 0.20) 4.5 (0.18)
Brake disc runout — 0.30 (0.012)
Brake caliper cylinder bore Rear 38.180 – 38.230 (1.5031 – 1.5051) —
Brake caliper piston diameter Rear 38.080 – 38.130 (1.4992 – 1.5012) —
Item Specification Note
Brake fluid type DOT 4
Fastening part
Tightening torque
Note
N⋅m kgf-m lbf-ft
Rear brake caliper mounting bolt 23 2.3 16.5 )(Page 4C-2)
Rear brake pad mounting pin 17 1.7 12.5 )(Page 4C-2)
Pad pin plug 2.5 0.25 1.8 )(Page 4C-3)
Rear brake caliper sliding pin 27 2.7 19.5 )(Page 4C-3)
Brake hose union bolt 23 2.3 16.5 )(Page 4C-4)
Brake disc bolt 23 2.3 16.5 )(Page 4C-7)