Lighting Systems: 9B-7
Rear Combination Light Components
B944H19206006
Rear Combination Light Removal and
Installation
B944H19206008
Removal
1) Remove the rear fender assembly. Refer to “Exterior
Parts Removal and Installation in Section 9D
(Page 9D-4)”.
2) Remove the screws (1).
3) Remove the rear fender bracket (2) by removing the
rear turn signal light mounting nuts (3).
4) Disconnect the seat lock cable (4).
FWD
1
(a)
2
I944H1920045-02
1. Brake light/Taillight bulb (12 V 21/5 W) : 1.8 N⋅m (0.18 kgf-m, 1.5 lbf-ft)
2. Rear combination light mounting bolt
1
I944H1920013-01
3
2
I944H1920014-03
To Next Page
Loading...
