Rear Brakes: 4C-1
Brake
Rear Brakes
Repair Instructions
Rear Brake Components
B944H14306001
Rear Brake Pad Inspection
B944H14306002
The extent of brake pads wear can be checked by
observing the grooved limit line “A” on the pads. When
the wear exceeds the grooved limit line, replace the
pads with new ones. Refer to “Rear Brake Pad
Replacement (Page 4C-2)”.
CAUTION
!
Replace the brake pad as a set, otherwise
braking performance will be adversely
affected.
5
6
(e)
(e)
(b)
(c)
(d)
(a)
1
2
3
4
I944H1430026-01
1. Rear caliper bracket 6. Rear brake disc : 23 N⋅m (2.3 kgf-m, 16.5 lbf-ft)
2. Piston : 6 N⋅m (0.6 kgf-m, 4.5 lbf-ft) : Apply silicone grease to sliding surface.
3. Piston seal : 27 N⋅m (2.7 kgf-m, 19.5 lbf-ft) : Apply thread lock to thread part.
4. Dust seal : 17 N⋅m (1.7 kgf-m, 12.5 lbf-ft) : Apply brake fluid.
5. Rear brake pad set : 2.5 N⋅m (0.25 kgf-m, 1.8 lbf-ft) : Do not reuse.
“A”
I944H1430001-02
To Next Page
Loading...
