4C-2 Rear Brakes:
Rear Brake Pad Replacement
B944H14306003
1) Remove the plug (1).
2) Remove the pad mounting pin (2).
3) Remove the caliper mounting bolt (3).
CAUTION
!
Do not operate the brake pedal while
dismounting the pads.
4) Remove the brake pads with the rear caliper pivoted
up.
NOTE
When removing the pads, push the piston all
the way into brake caliper.
5) Clean up the caliper especially around the caliper
piston.
6) Install the new brake pads.
CAUTION
!
Replace the brake pads as a set, otherwise
braking performance will be adversely
affected.
NOTE
Make sure that the detente of the pad is
seated onto the retainer on the caliper
bracket.
7) Tighten the caliper mounting bolt (4) and pad
mounting pin (5) to the specified torque.
Tightening torque
Rear brake caliper mounting bolt (a): 23 N·m (
2.3 kgf-m, 16.5 lbf-ft)
Rear brake pad mounting pin (b): 17 N·m (1.7
kgf-m, 12.5 lbf-ft)
1
I944H1430002-02
2
3
I944H1430003-02
I944H1430004-02
I944H1430006-02
(b)
5
(a)
4
I944H1430007-02
To Next Page
Loading...
