Suzuki SFV650 - Rear Brake Master Cylinder Parts Inspection; Specifications; Service Data

4A-16 Brake Control System and Diagnosis:
• Apply grease to the push rod end.
: Grease 99000–25100 (SUZUKI Silicone
Grease or equivalent)
• Install the O-ring (1).
CAUTION
!
Replace the O-ring (1) with a new one.
Rear Brake Master Cylinder Parts Inspection
B944H14106017
Refer to “Rear Brake Master Cylinder Disassembly and
Assembly (Page 4A-15)”.
Master Cylinder
Inspect the master cylinder bore for any scratches or
other damage.
Piston
Inspect the piston surface for any scratches or other
damage.
Rubber Parts
Inspect the primary cup, secondary cup and dust boot
for wear or damage.
Specifications
Service Data
B944H14107001
Brake
Unit: mm (in)
Oil
I944H1410034-01
1
I837H1410049-01
I649G1410038-02
I837H1410050-01
Item Standard Limit
Rear brake pedal height 45 – 55 (1.8 – 2.2) —
Master cylinder bore
Front
14.000 – 14.043 (0.5512 – 0.5529)
—
Rear —
Master cylinder piston diameter
Front
13.957 – 13.984 (0.5495 – 0.5506)
—
Rear —
Item Specification Note
Brake fluid type DOT 4