Suzuki SFV650 - Horn Removal and Installation

9C-8 Combination Meter / Fuel Meter / Horn:
3) Inspect the horn button for continuity with a tester.
If any abnormality is found, replace the left
handlebar switch assembly with a new one.
Refer to “Handlebars Removal and Installation in
Section 6B (Page 6B-3)”.
Special tool
: 09900–25008 (Multi-circuit tester set)
Tester knob indication
Continuity ( )
4) After finishing the horn button inspection, reinstall
the removed parts.
Horn Inspection
1) Remove the horn. Refer to “Horn Removal and
Installation (Page 9C-8)”.
2) Connect a 12 V battery to terminal “A” and terminal
“B”. If the sound is not heard from the horn, replace
the horn with a new one.
3) Install the horn.
Horn Removal and Installation
B944H19306026
Removal
1) Remove the left frame body cover. Refer to “Exterior
Parts Removal and Installation in Section 9D
(Page 9D-4)”.
2) Disconnect the horn couplers (1).
3) Remove the horn (2) by removing the mounting bolt
(3).
Installation
Install the horn in the reverse order of removal.
I718H1930028-03
I944H1930023-01
1
2
3
I944H1930024-01