Suzuki SFV650 - Throttle Body Construction

Engine Mechanical: 1D-8
Throttle Body Construction
B944H11406041
Outlet tube clamp
Outlet tube clamp
“b”
“c”
“d”
Intake pipe clamp
“a”
FWD
FWD
FWD
FWD
2
3
“A”
1
“C”
“B”
“C”
“D”
3
I944H1140342-02
1. Clean inlet sheet “B”: Face the tip of the front side clamp to upper. “b”: 15 – 25°
2. Fuel hose
: Pass the fuel hose under the throttle body.
“C”: Face the tip of the clamp to inside. “c”: 35 – 45°
3. Breather hose “D”: Make sure that the intake pipe clamp is not
contacted to the throttle body.
“d”: 0 – 10°
“A”: White mark “a”: 15°