2D-8 Wheels and Tires:
2) First install the right wheel bearing, then install the
spacer (1) and left wheel bearing with the special
tool.
Special tool
(A): 09913–70210 (Bearing installer set)
(B): 09941–34513 (Steering race installer)
CAUTION
!
The sealed cover of the bearing must face
outside.
3) Install the dust seals with the special tool.
Special tool
(C): 09913–70210 (Bearing installer set)
4) Apply grease to the lip of dust seals.
: Grease 99000–25010 (SUZUKI SUPER
GREASE A or equivalent)
5) Install the front wheel assembly. Refer to “Front
Wheel Assembly Removal and Installation
(Page 2D-4)”.
1. Spacer “a”: Clearance
(A)
(B)
I944H1240020-01
Right
Left
(B)
(A)
Right
Left
(A)
“a”
1
(B)
(A)
I944H1240047-03
(C)
I944H1240022-01
I944H1240023-01
To Next Page
Loading...
