Engine Mechanical: 1D-12
2) Remove the throttle link rod (3) and secondary
throttle link rod (4).
3) Remove the fuel delivery pipe assemblies (5).
CAUTION
!
Be careful not to twist the fuel delivery pipe,
when disconnecting the fuel feed hose or
removing the fuel delivery pipe.
4) Remove the fuel injectors (6) from the fuel delivery
pipes (7).
5) Remove the TP sensor (8) and STP sensor (9) by
removing each screw (10) and (11).
NOTE
Prior to disassembly, mark sensor’s original
position with a paint or scribe for accurate
reinstallation.
Special tool
: 09930–11950 (Torx wrench)
CAUTION
!
Never remove the STVA (12) and link plates
(13) from the throttle body.
4
3
I944H1140270-02
5
5
I944H1140271-02
7
6
6
I944H1140272-02
9
8
11
10
I944H1140273-04
13
12
I944H1140274-03
To Next Page
Loading...
