Suzuki SFV650 - Page 212

1D-23 Engine Mechanical:
• Install the front right engine mounting bolt (6) and
spacer (7) temporarily.
• Apply thread lock to the front left engine mounting bolt
(8) and tighten it.
: Thread lock cement 99000–32110
(THREAD LOCK CEMENT SUPER 1322 or
equivalent)
• Tighten all engine mounting bolts and nuts to the
specified torque, as shown in the following illustration.
7
6
8
I944H1140320-02
A
B
C
D
A
B
C
D
Left Right
5
1 “e”
(a)
1 “a”
(a)
2 “b”
(b)
3 “c”
(a)
(a)
4 “d”
I944H1140321-02
1. Engine mounting bolt (Cylinder head) “c”: 215 mm (8.5 in)
2. Engine mounting bolt (Front upper) “d”: 205 mm (8.1 in)
3. Engine mounting bolt (Rear upper) “e”: 70 mm (2.8 in)
4. Engine mounting bolt (Rear lower) : 55 N⋅m (5.5 kgf-m, 40.0 lbf-ft)
5. Spacer : 93 N⋅m (9.3 kgf-m, 67.5 lbf-ft)
“a”: 25 mm (1.0 in) : Apply thread lock to thread part.
“b”: 300 mm (11.8 in)