Suzuki SFV650 - Page 300

1F-6 Engine Cooling System:
4) Remove the radiator assembly (5) by removing the
bolts (6).
5) Remove the cooling fan assembly (7).
6) Remove the cooling fan (8).
7) Disconnect the coupler (9) and remove the cooling
fan motor (10).
8) Remove the radiator under rubber (11).
Installation
Install the radiator/cooling fan motor in the reverse order
of removal. Pay attention to the following points:
• Tighten the cooling fan assembly mounting bolts (1) to
the specified torque.
Tightening torque
Cooling fan assembly mounting bolt (a): 6.5 N·m (
0.65 kgf-m, 4.5 lbf-ft)
• Connect the radiator hoses securely. Refer to “Water
Hose Routing Diagram (Page 1F-3)”.
• Pour engine coolant. Refer to “Cooling System
Inspection in Section 0B (Page 0B-12)”.
• Bleed air from the cooling circuit. Refer to “Cooling
System Inspection in Section 0B (Page 0B-12)”.
1
5
6
I944H1160005-02
2
3
5
4
6
6
I944H1160006-02
7
I944H1160007-02
8
I944H1160008-02
9
10
I944H1160009-02
11
I944H1160010-02
(a)
1
(a)
1
I944H1160011-03