2D-14 Wheels and Tires:
2) First install the right wheel bearing, then install the
spacer (1) and left wheel bearing with the special
tools.
Special tool
(A): 09941–34513 (Steering race installer)
(B): 09913–70210 (Bearing installer set)
CAUTION
!
The sealed cover of the bearing must face
outside.
3) Install a new dust seal with the special tool.
Special tool
(C): 09913–70210 (Bearing installer set)
4) Apply grease to the dust seal lip.
: Grease 99000–25010 (SUZUKI SUPER
GREASE A or equivalent)
5) Install the rear sprocket mounting drum assembly
(2).
6) Install the rear wheel assembly. Refer to “Rear
Wheel Assembly Removal and Installation
(Page 2D-11)”.
1. Spacer “a”: Clearance
(A)
(B)
I944H1240036-01
Left
Right
Left
Right
1
“a”
(A)
(A)
(B)
(A)
(B)
I944H1240037-01
(C)
I944H1240038-01
I944H1240039-01
2
I944H1240040-01
To Next Page
Loading...
