Manual Transmission: 5B-11
6) Remove the bearings from right crankcase with the
special tool.
Special tool
(B): 09921–20240 (Bearing remover set)
(C): 09913–70210 (Bearing installer set)
Installation
CAUTION
!
The removed oil seals and bearings must be
replaced with new ones.
1) Install the bearings with the special tool.
Special tool
(A): 09913–70210 (Bearing installer set)
CAUTION
!
• The stamped mark side of bearing “A”
faces inside.
• The sealed side of the bearing “B” faces
outside.
2) Install the bearing retainers (1).
(B)
(C)
I944H1520036-01
(C)
I944H1520037-01
“A”
(A)
“A”
I944H1520038-01
(A)
“B”
“B”
(A)
I944H1520039-01
(A)
“A”
I944H1520040-01
1
I944H1520041-01
To Next Page
Loading...
