Suzuki SFV650 - Page 519

Steering / Handlebar: 6B-6
7) Remove the combination meter bracket (4) by
removing the bracket mounting bolts (5).
8) Remove the brake hose clamp (6).
9) Remove the ignition switch mounting bolts (7) with
the special tools.
Special tool
(A): 09930–11920 (Torx bit (JT40H))
(B): 09930–11940 (Bit holder)
10) Remove the handlebars. Refer to “Handlebars
Removal and Installation (Page 6B-3)”.
11) Remove the steering stem head nut (8) and washer
(9).
Remove the steering stem upper bracket (10).
12) Remove the steering stem nut (11) with the special
tool.
NOTE
When loosening the stem nuts, hold the
steering stem lower bracket to prevent it from
falling.
Special tool
(C): 09940–14911 (Steering stem nut
wrench)
13) Remove the steering stem lower bracket.
14) Remove the dust seal (12) and steering stem upper
bearing (13).
4
5
5
I944H1620011-02
6
I944H1620012-02
7
(B)
(A)
I944H1620013-02
8
9
10
I944H1620014-02
(C)
11
I944H1620015-02
13
12
I944H1620016-02