Suzuki SFV650 - Page 534

9A-7 Wiring Systems:
6
1
2
b
6
3
b
6
7
5
9
6
VIEW b VIEW a
7
5
6
5
6
7 8
8
a
9
9
“B”
4 “C”
“A”
“D”
“D”
1, 2
3, 4
I944H1910908-04
1. Rear combination light lead wire coupler 8. Rear frame cover
2. Right rear turn signal light lead wire coupler 9. Frange
3. Left rear turn signal light lead wire coupler “A”: Pass the wiring harness through the hole provided on the upper part of rear fender.
4. License plate light lead wire coupler “B”: Pass the clamp between the rear fender and the bulge-and-recess section of frame.
5. Rear front fender “C”: Fasten the clamp after the license plate right lead wire coupler has been connected.
6. Rear fender “D”: To prevent the wiring harness from pinched between the rear frame cover and the rear
fender, route the harness inside the flange located on the upper part of rear fender.
7. Frame