0C-6 Service Data:
Brake + Wheel
Unit: mm (in)
Tire
Suspension
Unit: mm (in)
Item Standard Limit
Rear brake pedal height 45 – 55 (1.8 – 2.2) —
Brake disc thickness
Front 4.3 – 4.7 (0.17 – 0.19) 4.0 (0.16)
Rear 4.8 – 5.2 (0.19 – 0.20) 4.5 (0.18)
Brake disc runout — 0.30 (0.012)
Master cylinder bore
Front 14.000 – 14.043 (0.5512 – 0.5529) —
Rear 14.000 – 14.043 (0.5512 – 0.5529) —
Master cylinder piston diam.
Front 13.957 – 13.984 (0.5495 – 0.5506) —
Rear 13.957 – 13.984 (0.5495 – 0.5506) —
Brake caliper cylinder bore
Front 27.000 – 27.076 (1.0630 – 1.0660) —
Rear 38.180 – 38.230 (1.5031 – 1.5051) —
Brake caliper piston diam.
Front 26.920 – 26.970 (1.0598 – 1.0618) —
Rear 38.080 – 38.130 (1.4992 – 1.5012) —
Brake fluid type DOT 4 —
Wheel rim runout
Axial — 2.0 (0.08)
Radial — 2.0 (0.08)
Wheel axle runout
Front — 0.25 (0.010)
Rear — 0.25 (0.010)
Wheel rim size
Front 17 M/C x MT 3.50 —
Rear 17 M/C x MT 5.00 —
Item Standard Limit
Cold inflation tire pressure
(Solo riding)
Front 225 kPa (2.25 kgf/cm
2
, 33 psi) —
Rear 250 kPa (2.50 kgf/cm
2
, 36 psi) —
Cold inflation tire pressure
(Dual riding)
Front 225 kPa (2.25 kgf/cm
2
, 33 psi) —
Rear 250 kPa (2.50 kgf/cm
2
, 36 psi) —
Tire size
Front 120/70 ZR17 M/C (58 W) —
Rear 160/60 ZR17 M/C (69 W) —
Tire type
Front DUNLOP: Qualifier J —
Rear DUNLOP: Qualifier J —
Tire tread depth
(Recommended depth)
Front — 1.6 mm (0.06 in)
Rear — 2.0 mm (0.08 in)
Item Standard Limit
Front fork stroke 125 (4.9) —
Front fork inner tube O.D. 41 (1.61) —
Front fork spring free length 446.5 (17.58) 437 (17.2)
Front fork oil level (Without spring,
outer tube fully compressed)
96 (3.78) —
Front fork oil type SUZUKI FORK OIL SS-08 or an equivalent fork oil —
Front fork oil capacity (Each leg) 517 ml (17.5/18.2 US/Imp oz) —
Front fork spring adjuster 3th groove from top —
Rear shock absorber spring pre-set
position
3/7 —
Rear wheel travel 130 (5.1) —
Swingarm pivot shaft runout — 0.3 (0.01)
To Next Page
Loading...
