Engine General Information and Diagnosis: 1A-34
Step Action Yes No
3 3) If there is continuity, check there is no continuity
between the G/B wire “A” and ground, G/Y wire “B” and
ground.
Also the G/B wire “A” and another wire, G/Y wire “B” and
another wire.
Special tool
(A): 09900–25008 (Multi circuit tester set)
(B): 09900–25009 (Needle pointed probe set)
Tester knob indication
Continuity ( )
Is the continuity OK?
Go to Step 4. • Open or short circuit
in the G/B wire (#1
cylinder).
• Open or short circuit
in the G/Y wire (#2
cylinder).
(A)
V
“A”, “B”
I944H1110118-01
To Next Page
Loading...
