1.3.2.4.1 Wiring instructions
1.3.2.4.1.1 Overview of connectors
1.3.2.4.1.2 Power supply, phases and brake
1.3.2.4.1.3 Encoders and IO
1.3.2.4.1.4 Connector details and mating parts numbers
1.3.2.4.2 Mounting instructions
1.3.2.4.2.1 Heat dissipation
1.3.2.4.2.2 Thermal mounting considerations
1.3.2.4.2.3 Dimensions
1.3.2.4.2.4 Interference with magnetic fields
1.3.2.4.3 On-site installation guide (UL)
1.3.2.4.3.1 Branch fuse required
1.3.2.4.3.2 Field wiring terminal marking
1.3.2.4.3.3 Downloads
1.3.2.5 LED signals
1.3.2.5.1 Overview
1.3.2.5.1.1 Legend
1.3.2.5.2 Core LED
1.3.2.5.2.1 Firmware
1.3.2.5.2.2 Bootloader
1.3.2.5.3 Drive LED
1.3.2.5.4 Com LED
1.3.2.6 SOMANET Node Safety (Original instructions)
1.3.2.6.1 Dimensions
1.3.2.6.2 Specifications of the safety functions
1.3.2.6.2.1 System requirements
1.3.2.6.2.2 Technical specifications
1.3.2.6.2.3 Block diagram
1.3.2.6.3 Setup of the safety functions
1.3.2.6.3.1 Connecting the STO/SBC inputs
1.3.2.6.3.2 Connection diagram for the brake
1.3.2.6.3.3 Connector mating parts and cable lengths
1.3.2.6.4 Using the safety functions
1.3.2.6.4.1 Timing diagrams
1.3.2.6.4.2 Truth table for digital inputs
1.3.2.6.4.3 Diagnostic functions
1.3.2.6.4.4 STO-SBC status register
1.3.2.6.5 Examples for realising safety functions
1.3.2.6.5.1 Prevention of unexpected start-up
1.3.2.6.5.2 Stop category 0 (STO)
1.3.2.6.5.3 Stop category 1 (SS1)
1.3.2.6.6 Commissioning and maintenance
1.3.2.6.6.1 Commissioning
1.3.2.6.6.2 Maintenance
1.3.2.6.7 Changelog of the safety-related documentation
1.4 SOMANET Accessories
234
234
235
240
248
249
249
249
251
252
254
254
255
256
257
257
257
258
258
259
259
260
261
262
263
263
263
265
266
267
270
272
273
273
276
276
277
279
279
279
280
283
283
283
284
285
To Next Page
Loading...
Need help?
General
