8-10 Sysmex XP-300
Display and Output of Analysis Results
Revised May 2012
Output of analysis result (latest sample)
The analysis data displayed on the analysis result screen can be
printed by the internal/external printer, or output to the host
computer.
(1) Display the analysis data you want to print on the analysis result
screen, and press the [Out/Del] button.
The output/delete menu dialog will appear.
(2) Select the output destination button from the internal printer
(IP), graphic printer (GP), list printer (LP) or host computer
(HC).
• [Current]: Prints/outputs the analysis result.
• [Cancel]: Closes the output/delete menu dialog.
• The output/delete menu dialog buttons are valid only for
output destination buttons set in [Host Output] and
[Printer] in the Settings menu.
• When outputting to the host computer, it is possible to
output to either the serial port (RS-232C) or LAN
(Ethernet), depending on the user setting.
• User settings can also be made for automatic output.
(See “Host Output” and “Printer” in “11.2 Possible
settings”.)
To Next Page
Loading...
