SYSMEX XP Series - Page 115

Sysmex XP-300 8-19
Display and Output of Analysis Results
Revised May 2012
Output of stored data
The analysis data displayed on the stored data screen can be printed
by the internal/external printer, or output to the host computer.
(1) Select the data you want to output on the list screen of the stored
data screen or display the data you want to output on the detail
screen, then press the [Out/Del] button.
The output/delete menu dialog is displayed.
(2) Select the output destination button from the internal printer
(IP), graphic printer (GP), list printer (LP) or host computer
(HC).
• [Current]: Prints/outputs the analysis result.
• [Cancel]: Closes the output/delete menu dialog.
Note:
• The output/delete menu dialog buttons are valid only for
output destination buttons set in [Host Output] and
[Printer] options in the Settings menu.
• When outputting to the host computer, it is possible to
output to either the serial port (RS-232C) or LAN
(Ethernet), depending on the user setting.
• User settings can also be made for automatic output.
(See “Host Output” and “Printer” in “11.2 Possible
settings”.)