80591ST10886A Rev.2 Page 109 of 200 2018-07-02
<mode> [0] buffer unsolicited result codes in the modem. When the
buffer is full,indications may be discarded.
1
Discard indication and reject new received message
unsolicited result codes when TA-TE link is reserved (e.g. in
on-line data mode). Otherwise forward them directly to the
TE.
2
Buffer unsolicited result codes in the TA when TA-TE link is
reserved (e.g. in on-line data mode) and flush them to the TE
after reservation. Otherwise forward them directly to the TE.
<mt>
The rules for storing
received SMS depend
on its data coding
scheme, preferred
memory storage
(AT+CPMS) setting and
this value:
[0] No SMS-DELIVER indications are routed to the TE.
1 If SMS-DELIVER is stored into ME/TA, indication of the
memory location is routed to the TE using unsolicited result
code: +CMTI: <mem3>,<index>.
2 SMS-DELIVERs (except class 2 messages and messages in
the message
waiting indication group (store message)) are routed directly
to the DTE
using unsolicited result code +CMT:
class 2 messages and messages in the message waiting
indication group
(store message) result in indication as defined in <mt>=1
3
class 3 SMS-DELIVERs are routed directly to DTE using
unsolicited result codes defined in <mt>=2. Messages of
other data coding schemes result in indication as defined in
<mt>=1
<bm>
The rules for storing
received CBMs depend
on its data coding
scheme, the setting of
Select CBM
Types (AT+CSCB) and
this value:
[0] no CBM indications are routed to the DTE
2
New CBMs are routed directly to the TE using unsolicited
result code:
+CBM: <length><CR><LF><pdu> (PDU mode enabled); or
+CBM:
<sn>,<mid>,<
dcs>,<page>,<pages><C
R><LF><dat
a
> (text
mode enabled)
<ds> [0] No SMS-STATUS-REPORTs are routed to the TE.
1 SMS-STATUS-REPORTs are routed to the TE using
unsolicited result code:
+CDS: <length><CR><LF><pdu> (PDU mode enabled); or
To Next Page
Loading...
Need help?
General
