Telit Wireless Solutions LN940A11 SERIES - Page 71

80591ST10886A Rev.2 Page 71 of 200 2018-07-02
Syntax
Type
Command
Possible Return
Result
Instruction
Test Command AT+ CMEE =? +CMEE: (0,1,2)
OK
-
Read Command AT+ CMEE? +CMEE: 2
OK
-
Write Command AT+ CMEE =<n> OK
Parameter Description
parameter
Value
Instruction
<n> 0
Disable +CME ERROR: <err> result code and use ERROR instead
1
Enable +CME ERROR: <err> result code and use numeric <err> values (refer next
subclause)
2
Enable +CME ERROR: <err> result code and use verbose <err> values (refer next
subclause)