USTER HVI SPECTRUM - Page 212

USTER
®
HVI SPECTRUM Instruction Manual
Uster Technologies, Inc. Chapter 14
Appendix • Page 14-26
“Error: Positioner not at front
of cabinet before taking
sample”
Reset and initialize Length/Strength
unit to continue.
“Error: Positioner not at
middle sensor before carding
sample”
Reset and initialize Length/Strength
unit to continue.
“Error: Positioner not in
correct position for carding
sample”
Reset and initialize Length/Strength
unit to continue.
“Error: Positioner not in
correct position for brushing
sample”
Reset and initialize Length/Strength
unit to continue.
“Error: Positioner not able to
find back sensor after
brushing”
Reset and initialize Length/Strength
unit to continue.
“Error: Positioner not at back
sensor before reading length
data”
Reset and initialize Length/Strength
unit to continue.
“Error: Positioner did not find
back sensor after taking
strength data”
Reset and initialize Length/Strength
unit to continue.
“Error: Positioner not at
correct position for doffing
sample”
Reset and initialize Length/Strength
unit to continue.
"Error: Positioner not at
middle sensor after
completing Length/Strength
cycle”
Reset and initialize Length/Strength
unit to continue.