USTER
®
HVI SPECTRUM
Instruction Manual
Uster Technologies, Inc. Chapter 6
Configurations • Page 6-3
The TEST SETUP tab contains information that is
crucial to test results.
The fields are explained as follows:
is to
ormation to be included
sing the Data To Transmit list.
standard deviations, and percent coefficient of variance (%
V).
ter of this manual) may also be included in the
ansmission type.
ved, a message will alert you
to check the data connections, etc.
ission option is specific for the
External Computer connection.
re-
with
enerated by the
HVI
SPECTRUM
during testing if
necessary.
1. The Database and External Computer Transmit options are
used to indicate where the data generated during the testing
be sent. If you select to send the information to an external
computer, you can choose specific inf
u
The Data To Transmit Types refer to the type of data the
transmission to host will include, such as individual observations,
means,
C
Various curves, such as the Universal Record Format (discussed in
the Appendix chap
tr
2. The Timeout on Transmit field is used to set the amount of time
(in seconds) that the computer will wait during the transmission of
data and the acceptance response from the external computer. If
an acceptance response is not recei
3. The Configure Serial Transm
4. The Grade Entry field is used to configure the system so that p
defined grades for sample cottons can be manually entered in
ASCII text format. This enables these grades to be compared
the grades g
To Next Page
Loading...
