EasyManua.ls Logo

Ventrac 4520P - While Operating the Machine Safety

Ventrac 4520P
260 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
While Operating the Machine Safety
Remain seated when operating the machine.
Always wear a seat belt if the machine has a roll cage/bar installed and in the
upright position.
Ensure that all bystanders are clear of the machine and attachment before
operation.
Stop operation immediately at any sign of equipment failure.
Never shift between high and low range while on a slope. Always move the
machine to level ground and engage the parking brake before shifting the range.
Never leave the machine unattended while it is running.
Always shut off the machine when connecting the attachment drive belt to the
power unit.
Never leave the operator’s station without lowering the attachment to the ground.,
engaging the parking brake, shutting off the engine, and removing the ignition key.
Never direct the discharge of any attachment in the direction of people, buildings,
animals, vehicles or other objects of value.
Never discharge material against a wall or obstruction. The material may ricochet
back toward the operator.
Do not run the engine in a building without adequate ventilation.
Do not touch the engine or the muffler while the engine is running or immediately
after stopping the engine.
4520P Page 1–3 General Safety Instructions: While Operating the
Machine Safety
09.40003Rev 00

Table of Contents

Related product manuals