EasyManua.ls Logo

Ventrac 4520P - General Electrical System Problems

Ventrac 4520P
260 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
General Electrical System Problems
If there is an electrical issue;
Check the main circuit breaker, ensure that the circuit breaker is in the O
N
position.
Serial # 01001–02232 check the 15 amp fuse in position F10 and the 5 amp fuse
in position F08. Replace the fuses if necessary.
Serial # 02232– check the 15 amp fuse in position F06 and the 5 amp fuse in
position F03. Replace the fuses if necessary.
The battery does not charge.
Possible Cause Corrective Action
Loose or corroded battery connections. Inspect and clean/tighten the battery
connections.
A broken or loose wire in the charging
system.
Inspect and tighten connections or
replace wires as required.
A blown fuse in the charging system. Replace blown fuses.
A blown or broken fusible link. Inspect/replace the fusible link.
The alternator/fan belt is loose. Tighten the alternator/fan belt.
A faulty regulator. Replace the regulator.
A faulty alternator. Replace the alternator.
The battery is defective. Replace the battery.
The lights do not activate.
Possible Cause Corrective Action
A blown fuse. Replace the fuse.
A faulty light. Replace the light.
A faulty switch. Replace the switch.
A broken wire. Locate and repair/replace the wire.
Troubleshooting: General Electrical System Problems Page 3–6 4520P
09.40003Rev 00

Table of Contents

Related product manuals