obstruction or blockage with your hands. Keep your hands, feet, and clothing
away from all power-driven parts.
• When changing the attachments, tires, or performing other service, use the
correct hoists, jacks, and jack stands, to raise and support the machine. Ensure
that the machine is parked on a solid level surface, such as a concrete floor.
Before lifting the machine remove all attachments. Failing to properly support the
raised machine with the appropriate jack stands can cause the machine to move
or fall and can result in personal injury; refer to Jacking Instructions, page 1–6.
• If welding on the machine is necessary, disconnect the battery negative cable to
prevent electrical system damage.
• Ensure potentially harmful waste (e.g., fuel, oil, engine coolant, filters, battery) are
disposed of in an environmentally safe manner in accordance with local
regulations.
• To ensure optimum performance and continued safety certification of the machine,
use genuine Ventrac replacement parts and accessories. Replacement parts and
accessories of other manufacturers can result in non-conformance of safety
standards and can void the warranty.
4520P Page 1–5 General Safety Instructions: Maintenance and Service
Safety
09.40003Rev 00
To Next Page
Loading...
