C H A P T E R 1 6 - C H A N G E L O G
AT5600 User Manual 98-119 issue 14 Page 384
Network Communications
The recommended method for communicating with an AT5600 is using Network
Communications. This will communicate over a standard TCP/IP Ethernet
network using the Ethernet interface on the computer and AT5600.
To enable network communications, select the option to āEnable network
communications serverā
After selecting the option to enable the network communications server, a prompt
will ask for the program to be restarted as shown. Click on OK, and close and
reopen the Server again.
When starting the server after enabling the network communications
server, the computer firewall may give a warning and ask for permission
for the server to communicate over the network.
This must be allowed otherwise communications cannot take place.
To Next Page
Loading...