3. Cabling
3-116
TI 33J01J10-01EN
lDierentiationbetweenBUS1andBUS2(WAN1andWAN2)
lDestination Display
Attach a display tag at the tip of cables to indicate the station number, switch number, and port
number of the destination.
lCable Fixing
lHandling of Vnet/IP Cables Connected to the Processor Module (CP461 or
CP471)
• Turn the power on after connecting the cables to the CP41.
• Before installing the CP41 on-line, connect a cable to it.
lHandling of Cables Connected to the AVR10D/AW810D
• The power supply should not be turned on unless the cables are connected.
connected cables.
lHandling of Cables Connected to the VI702
• The power of the PC should not be turned on until the cables are connected.
Oct. 5, 2018-00
To Next Page
Loading...
Need help?
General
