3. Cabling
3-99
TI 33J01J10-01EN
Elements of the shunt resistor unit
F030832.ai
Cables
Cover
Slots
Terminal block
(Corresponds to
channels 1 to 4
from the top)
Shunt resistor
module
Short plug
Figure Shunt resistor unit
The shunt resistor unit has terminal blocks for channel numbers 1 to 4. Each terminal block is
are installed on these slots when the unit is shipped from the factory. The shunt resistor unit
comes with shunt resistor modules and cables for connecting the shunt resistor unit and the nest
Installation and wiring for the shunt resistor unit
CAUTION
Handle shunt resistor module in A2EXR001 with care as it may become high in temperature. Use
Oct. 5, 2018-00
To Next Page
Loading...
Need help?
General
