3. Cabling
3-83
TI 33J01J10-01EN
• Shunt Resistor Unit (A2EXR001)
SEE
ALSO
current pulse signal inputs.
Structure and parts of the shunt resistor unit
The shunt resistor unit has terminal blocks with either pressure clamp terminals or spring clamp
terminals.
the model with pressure clamp terminal-type terminal blocks.
F030829.ai
Cover
Slots
Terminal block
(Corresponds to
channels 1 to 4
from the top)
Shunt resistor
module
Short plug
Figure Shunt resistor unit
The shunt resistor unit has terminal blocks for channel numbers 1 to 4. Each terminal block is
are installed on these slots when the unit is shipped from the factory. The shunt resistor modules
are accessories.
Oct. 5, 2018-00
To Next Page
Loading...
Need help?
General
