vii
TI 33Q01J10-01E
Maintenance
• The maintenance work for the devices described in this manual should be performed only
by the educated experts.
• When the device becomes dusty, use a vacuum cleaner or a soft cloth to clean it.
• During maintenance, put up wrist strap, and take other ESD (Electrostatic Discharge)
measures.
• If the existing caution label is dirty and illegible, prepare a new label (part number:T9029BX)
to replace it.
SEE
ALSO
For Maintenance, refer to 1.5.2, “Countermeasures against Static Electricity.”
Drawing Conventions
Some drawings may be partially emphasized, simplified, or omitted, for the convenience of
description.
Dec. 25, 2002-00
To Next Page
Loading...
